High Voltage Products
M Series
Compact, Low-Profile, DC-to-DC Regulated Supplies
Advanced Energy's UltraVolt M series of regulated DC-to-DC supplies provide high voltage power in a lightweight, low-profile, and PCB-mountable package.
- Maximum Output Voltage/Power: 3 kV DC/1 W
- Type: Single output
- Ripple: 100 ppm
- Control Interface: Analog
- Temperature Coefficient: 100 ppm/⁰C
- Overview
- Technical Specs
- Documents
- Service & Support
- Distributors
Overview
The UltraVolt M series is ideal for biasing applications where clearance height is limited. It features seven models offering 600 to 3000 VDC of maximum high voltage power. The modules are available in either single-output positive or negative polarities and deliver up to 1 W of power from a 5, 12, 15, or 24 VDC input. Protection against reversed input polarity, short circuits, and arcing is standard. Flying lead outputs and enhanced analog interfaces, which include current monitoring and enable/disable output control, are available.
Benefits
- Meet product packaging requirements
- Design power subsystems around product needs — not high voltage module constraints
- Achieve higher precision than proportional-control high voltage supplies
- Enhance application performance through responsive control of high voltage output
- Increase power subsystem robustness and reliability
Features
- Low profile, lightweight, PCB-mountable package
- Wide selection of input and output voltage configurations
- Low output ripple, temperature coefficient, and line regulation (Analog interface with integral voltage control and voltage/current monitors
- Integrated reverse input polarity, short-circuit/arc, and overcurrent protection
-
Electrical
Input Voltage
5, 12, 15, or 24 VDC (positive polarity only)
High Voltage Outputs
Single (positive or negative polarity)
Temperature Coefficient
100 ppm/⁰C
Maximum Power Output
0.5, 0.8, or 1 W
-
High Voltage Output Range
0.6M
0 to 600 VDC
1M
0 to 1000 VDC
1.25M
0 to 1250 VDC
1.5M
0 to 1500 VDC
2M
0 to 2000 VDC
2.5M
0 to 2500 VDC
3M
0 to 3000 VDC
-
Ripple
Lowest available with standard configuration at 100% LOAD, 100% HVout
0.6M
< 100 ppm
1.25M
< 100 ppm
1.5M
< 100 ppm
1M
< 100 ppm
2.5M
< 100 ppm
2M
< 100 ppm
3M
< 100 ppm
-
Environmental
Operating Temperature Range
-10 to 65⁰C (14 to 149⁰F) case temperature
Storage
-40 to 70⁰C (-40 to 158⁰F) case temperature
Humidity
0 to 95% RH, non-condensing
-
Mechanical
L x W x H
47 x 28 x 12 mm (1.85 x 1.10 x 0.47 in)
Volume
16.4 cm3 (1.0 in3)
Weight
35 g (1.2 oz)
Case Construction
Tin-plated steel
Encapsulation
Silicone-based RTV or Epoxy (model-specific)
-
Interface
Interface
Analog (positive or negative polarity), -EI interface option available
Control Signal Levels
Voltage: 0 to 2.5 VDC or 0 to 5 VDC (full-scale) depending on module-supply voltage
Current: Monitoring via either a 0 to 2.5 VDC or 0 to 5 VDC return signal depending on modelControl Accuracy
Voltage Output: ± 1%
Monitor Accuracy
Voltage Output: ± 2
Current Output: ± 2 (-EI interface only)HV Output Enable/Disable
Yes (-EI interface only)
-
Options & Accessories
Flying Leads
- Shielded and unshielded cables to safely route high voltage output to where it is needed, without system redesign
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Data Sheets
Brochures
Application Notes
Helpful Links
Global Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Warranties
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
Product Support
Call
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Email
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).
Compare Products
Low-Profile, Regulated
Small-Footprint, Regulated
Compact, Proportional
Low-Profile, Regulated
Micro-Size, Regulated
3 kV DC
3 kV DC
3 kV DC
6 kV DC
0.5 kV DC
1 W
1 W
1.5 W
6 W
0.1 W
Single Output
(positive or negative polarity)
Single Output
(positive or negative polarity)
Single Output
(positive or negative polarity)
Single Output
(positive or negative polarity)
Single Output
(positive or negative polarity)
< 100 ppm (0.06 Vpp)
< 100 ppm (0.06 Vpp)
< 5000 ppm (0.5 Vpp)
< 200 ppm (0.2 Vpp)
< 100 ppm (0.02 Vpp)
16 cm3 (1.0 in3)
14 cm3 (1.0 in3)
29 cm3 (1.8 in3)
36 cm3 (2.2 in3)
5.8 cm3 (0.35 in3)