High Voltage Power Supplies

M Series

Compact, Low-Profile, DC-to-DC Regulated Supplies

Advanced Energy's UltraVolt M series of regulated DC-to-DC supplies provide high voltage power in a lightweight, low-profile, and PCB-mountable package. 

  • Maximum Output Voltage/Power: 3 kV DC/1 W
  • Type: Single output
  • Ripple: 100 ppm (0.06 Vpp)
  • Control Interface: Analog
  • Temperature Coefficient: 100 ppm/⁰C
  • Overview
  • Technical Specs
  • Service & Support

Overview

The UltraVolt M series is ideal for biasing applications where clearance height is limited. It features seven models offering 600 to 3000 VDC of maximum high voltage power. The modules are available in either single-output positive or negative polarities and deliver up to 1 W of power from a 5, 12, 15, or 24 VDC input. Protection against reversed input polarity, short circuits, and arcing is standard. Flying lead outputs and enhanced analog interfaces, which include current monitoring and enable/disable output control, are available.

Benefits

  • Meet product packaging requirements
  • Design power subsystems around product needs — not high voltage module constraints
  • Achieve higher precision than proportional-control high voltage supplies
  • Enhance application performance through responsive control of high voltage output
  • Increase power subsystem robustness and reliability

Features

  • Low profile, lightweight, PCB-mountable package
  • Wide selection of input and output voltage configurations
  • Low output ripple, temperature coefficient, and line regulation (Analog interface with integral voltage control and voltage/current monitors
  • Integrated reverse input polarity, short-circuit/arc, and overcurrent protection
  • Electrical

    Input Voltage

    5, 12, 15, or 24 VDC (positive polarity only)

    High Voltage Outputs

    Single (positive or negative polarity)

    Temperature Coefficient

    100 ppm/⁰C 

    Maximum Power Output

    0.5, 0.8, or 1 W

  • High Voltage Output Range

    0.6M

    0 to 600 VDC

    1M

    0 to 1000 VDC

    1.25M

    0 to 1250 VDC

    1.5M

    0 to 1500 VDC

    2M

    0 to 2000 VDC

    2.5M

    0 to 2500 VDC

    3M

    0 to 3000 VDC

  • Ripple

    Lowest available with standard configuration at 100% LOAD, 100% HVout

    0.6M

    < 100 ppm (0.06 Vpp)

    1.25M

    < 100 ppm (0.13 Vpp)

    1.5M

    < 100 ppm (1.5 Vpp)

    1M

    < 100 ppm (0.1 Vpp)

    2.5M

    < 100 ppm (0.25 Vpp)

    2M

    < 100 ppm (0.2 Vpp)

    3M

    < 100 ppm (0.3 Vpp)

  • Environmental

    Operating Temperature Range

    -10 to 65⁰C (14 to 149⁰F) case temperature

    Storage

    -40 to 70⁰C (-40 to 158⁰F) case temperature

    Humidity

    0 to 95% RH, non-condensing

  • Mechanical

    L x W x H

    47 x 28 x 12 mm (1.85 x 1.10 x 0.47 in)

    Volume

    16.4 cm3 (1.0 in3)

    Weight

    35 g (1.2 oz)

    Case Construction

    Tin-plated steel

    Encapsulation

    Silicone-based RTV or Epoxy (model-specific)

  • Interface

    Interface

    Analog (positive or negative polarity), -EI interface option available

    Control Signal Levels

    Voltage: 0 to 2.5 VDC or 0 to 5 VDC (full-scale) depending on module-supply voltage
    Current: Monitoring via either a 0 to 2.5 VDC or 0 to 5 VDC return signal depending on model

    Control Accuracy

    Voltage Output: ± 1%

    Monitor Accuracy

    Voltage Output: ± 2
    Current Output: ± 2 (-EI interface only)

    HV Output Enable/Disable

    Yes (-EI interface only)

  • Options & Accessories

    Flying Leads

    • Shielded and unshielded cables to safely route high voltage output to where it is needed, without system redesign

Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.

Global Support & Services

Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.

Learn More

Applications Support & Consulting

Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.

Learn More

Warranties

Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.

Learn More

Product Support

Call
Inside the U.S.: 1.800.446.9167 (option 2)
Outside the U.S.


Email
Thin Film Support
Thermal Product Support
Other Technical Support

Compare Products

Classification

Low-Profile, Regulated

Small-Footprint, Regulated

Compact, Proportional

Low-Profile, Regulated

Micro-Size, Regulated

Maximum Output Voltage

3 kV DC

3 kV DC

3 kV DC

6 kV DC

0.5 kV DC

Maximum Output Power

1 W

1 W

1.5 W

6 W

0.1 W

Type

Single Output
(positive or negative polarity)

Single Output
(positive or negative polarity)

Single Output
(positive or negative polarity)

Single Output
(positive or negative polarity)

Single Output
(positive or negative polarity)

Ripple (best performance)

< 100 ppm (0.06 Vpp)

< 100 ppm (0.06 Vpp)

< 5000 ppm (0.5 Vpp)

< 200 ppm (0.2 Vpp)

< 100 ppm (0.02 Vpp)

Volume (smallest model)

16 cm3 (1.0 in3)

14 cm3 (1.0 in3)

29 cm3 (1.8 in3)

36 cm3 (2.2 in3)

5.8 cm3 (0.35 in3)

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.