Temperature Measurement Products
Impac IGA 140/23 Series
Digital, Highly Accurate Infrared Thermometers With Optional Interfaces, 50 to 1800°C
Advanced Energy's Impac IGA 140/23 series pyrometers are digital, highly accurate pyrometers for non-contact temperature measurement on metals, ceramics, graphite etc.
- Temperature ranges between 50 and 1800°C
- Available with three different focusable optics
- Short response times <1.5 ms
- Extremely small spot sizes min 0.5 mm
- Available with Ethernet, Profinet, and Profibus interfaces
- Technical Specs
- Service & Support
The Impac® IS 140/23 series includes digital, highly accurate pyrometers for non-contact temperature measurement on metals, ceramics, graphite, etc. in temperature ranges between 50 and 1800°C. Three different focusable optics with extremely small spot sizes are available.
The -PB types are equipped with a Profibus-DP interface and -PN types are equipped with a Profinet interface. They can easily be integrated into existing Profibus and Profinet systems, respectively. As part of standard delivery, the GSD file (Profibus) and GSDML (Profinet) offer a selection of five different module configurations for varying requirements. The -ET types are equipped with an Ethernet interface.
- Change optics without recalibration of the pyrometer
- Set any temperature sub-range within the full temperature range
- Achieve accurate alignment and safe mounting with the housing with precision mounting rail
- Connect to existing Profibus and Profinet systems with optional interfaces
- Standard switchable digital RS232/RS485 interface with optional Profinet, Profibus, and Ethernet interfaces
- Adjustable settings via the instrument, integrated keypad, or via the interface
- Laser target light or through lens viewfinder
- Built-in digital display with temperature indication
Select specifications are shown below. Please see product data sheet for additional specifications.
50 to 700 °C (MB 7)
75 to 900 °C (MB 9)
100 to 1300 °C (MB 13)
150 to 1800 °C (MB 18)
Any range adjustable within the temperature range, minimum span: 50°C
2.0 to 2.6 µm
Up to 400°C: 2°C
400 to 1500°C: 0.3% of reading in °C + 2°C
Above 1500°C: 0.5% of reading in °C
ε = 1, t90 = 1 s, Tamb. = 23°C
0.1% of reading in °C + 1°C
ε = 1, t90 = 1 s, Tamb. = 23°C
Exposure Time t90
< 1.5 ms; with dynamical adaption at low signal levels
10.0 to 100.0% adjustable via interface in steps of 0.1%
Laser targeting light (max. power level < 1 mW, λ = 630-680 nm, CDRH class II) or through lens viewfinder
Three different focusable optics
Distance Ratio (FOV)
Minimum 340:1 (minimum 0.5 mm)
Interface and Communication
Illuminated LC display for temperature indication or parameter settings
Adjustable at the Device or via Interface: Emissivity, Transmittance τ, exposure time t90, 0 to 20 or 4 to 20 mA, subrange, clear times for maximum value storage, automatically or external deletion of maximum value storage, address, baud rate, wait time tW
Readable at the Device or via Interface: Measuring temperature, internal instrument temperature
0 to 20 mA or 4 to 20 mA (linear), switchable
RS232 or RS485 addressable (half duplex), switchable; Baud rate 1200 up to 115200 Bd
Alternatively: Profibus, Profinet, or Ethernet
IP65 (DIN 40 050)
0 to 70°C (32 to 158°F) at housing
-20 to 80°C (-4 to 176°F)
Approximately 0.55 kg (1.21 lb)
According to EU directives about electromagnetical immunity
24 VAC/DC (12 to 30 VAC/DC) (AC: 48 to 62 Hz)
Maximum 7.5 W
0 to 500 Ω
Power supply, digital interface, analog output are galvanically isolated against each other and housing
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Documents & SupportView All Impac IGA 140/23 Series Accessories
Global Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.