- Products
- Temperature Measurement Products
- Pyrometers
- Non-Metal Applications Pyrometers
- Impac IN 5 and IN 5 plus Series
Temperature Measurement Products
Impac IN 5 and IN 5 plus Series
Infrared Thermometers for Non-Contact Temperature Measurement, -32 to 900°C
Advanced Energy's Impac IN 5 and IN 5 plus pyrometers have a solid and robust design for temperature measurement of non-metallic surfaces and painted, coated, or anodized metals.
- Temperature Ranges: Between -32 and 900°C Analog Output:
- IN 5: 4 to 20 mA (linear), several temperature ranges available
- IN 5 plus: 0 or 4 to 20 mA (linear), adjustable
- Small spot sizes (IN 5 = min. 2 mm and IN 5 Plus = min. 1 mm)
- Overview
- Technical Specs
- Documents
- Accessories
- Service & Support
- Distributors
Overview
The Impac IN 5 and IN 5 plus pyrometers are specifically designed for non-contact temperature measurements on non-metallic surfaces and painted, coated, or anodized metals.
The version IN 5-L plus is equipped with optics with better fields of view for the measurements of small objects.
The high-speed version IN 5-H plus has a shorter exposure time of only 10 ms and is suited for fast-measuring tasks.
Benefits
- Operate in rough industrial environments
- Digitally store and process temperature data
- Adjust emissivity and exposure time directly in the instrument
- Optimally match instruments to the right applications
- Remotely adjust instrument parameters and configure a temperature subrange (IN 5 plus only)
Features
- High accuracy due to digital linearization of the ouput
- Compact housing
- Various optics available
- Digital interfaces RS232 or RS485 and laser targeting light sighting system (IN 5 plus only)
- Simple connection and operating with two wires (IN 5 only)
Select specifications are shown below. Please see product data sheet for additional specifications.
-
Temperature Ranges
IN 5
0 to 100°C (MB 1)
0 to 200°C (MB 2)
0 to 300°C (MB 3)
0 to 400°C (MB 4)
0 to 500°C (MB 5)
0 to 900°C (MB 9)
-32 to 50°C (MB 0.5)
-32 to 900°C (MB 9L)
Additional MB on requestIN 5 plus and IN 5-H plus
-32 to 900°C (MB 9)
IN 5-L plus
0 to 900°C (MB 9)
-
Measurement
Spectral Range
8 to 14 μm
Measurement Uncertainty
Repeatability
0.3% of reading in °C or 0.6°C (at ε = 1, t90= 1 s)
Whichever value is greater. The instrument must be at a constant ambient temperature for a minimum of 15 minutes (IN 5, IN 5 plus or IN 5-H plus) or 30 minutes (IN 5-L plus).Exposure Time t90
IN 5: 0.08 s; adjustable up to 5 s
IN 5 plus: 0.08 s; adjustable up to 30 s
IN 5-H plus: 0.01 s; adjustable up to 30 s
IN 5-L plus: 0.18 s; adjustable up to 30 sEmissivity ε
0.2 to 1 adjustable
-
Optical
Sighting
All IN 5 plus models: Laser target light (maximum power level < 1 mW, λ = 630 to 680 nm, CDRH class II)
Optics
Three fixed optics
Distance Ratio (FOV)
IN 5, IN 5 plus, and IN 5-H plus: 50:1 (2 mm)
IN 5-L plus: 100:1 (1 mm) -
Interface and Communication
Parameters
Analog Output
IN 5: 4 to 20 mA (linear)
All IN 5 plus models: 0 to 20 mA or 4 to 20 mA (linear), adjustableInterface
IN 5 plus models: RS232 or RS485 (addressable, half duplex), Baud rate 1.2 up to 19.2 kBd
-
Environmental
Protection Class
IP65 (DIN 40050)
Ambient Temperature
IN 5: 0 to 70°C
All IN 5 plus models: 0 to 63°CStorage Temperature
-20 to 70°C
Relative Humidity
Non-condensing conditions
Weight
Approx. 0.410 kg
Housing
Stainless steel
CE Label
According to EU directives about electromagnetic immunity
-
Electrical
Power Supply
24 VDC (18 to 30 V); nominal, ripple must be less than 0.5 V
Power Consumption
IN 5: Maximum 20 mA
All IN 5 plus models: Maximum 70 mALoad
IN 5: Maximum 700 Ω at 24 V (maximum 100 Ω at 12 V)
All IN 5 plus models: Maximum 500 Ω at 24 V (maximum 200 Ω at 18 V)Isolation
Power supply, analog outputs and digital interfaces are electrically isolated from each other
-
Typical Applications
- Plastics
- Fluids
- Rubber
- Painted Parts
- Paper
- Asphalt
- Ceramics
- Wood
- Textiles
- Glass
- Food
- Coated Metals
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Data Sheets
Brochures
Manuals
Application Notes
Accessories
Global Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Warranties
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
Product Support
Call
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Email
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).