Temperature Measurement Products
Impac IPE 140
Digital Pyrometer with Focusable Optics for Non-Contact Metal Temperature Measurement, 5 to 1200°C
Advanced Energy’s Impac IPE 140 is a highly accurate and fully digital pyrometer. It features focusable optics and is ideal for metal, ceramic, and graphite temperature measurement.
- Short response times
- Small spot sizes
- Built-in digital display with temperature indication
- Optimized through lens view finder or laser targeting light
- Overview
- Technical Specs
- Documents
- Accessories
- Service & Support
- Distributors
Overview
The digital Impac® IPE 140 pyrometers are highly accurate. They offer different focusable optics with extremely small spot sizes. Parameters can be selected via an integrated keypad and settings are indicated on a built-in LC-display. In measuring mode, the actual temperature is indicated.
Benefits
- Easily select parameters via keypad
- Reduce emissivity errors
- Safely mount and accurately align
- Detect small objects
Features
- Test current output
- Housing with precision mounting rail for safe mounting and accurate alignment
- Interface RS232 / RS485 switchable
- Focusable optics
Select specifications are shown below. Please see product data sheet for additional specifications.
-
Temperature Ranges
IPE 140
5 to 500°C (41 to 932°F)
30 to 1000°C (86 to 1832°F)
50 to 1200°C (122 to 2192°F)
Any range adjustable within the temperature range, minimum span 51°C -
Measurement
Spectral Range
3 to 5 μm
Measurement Uncertainty
Repeatability
0.1% of reading in °C + 1°C
ε = 1, t90 = 1 s, Tamb. = 23°CExposure Time t90
1.5 ms, with dynamical adaption at low signal levels; adjustable up to 10 s
Emissivity ε
10 to 100% adjustable in steps of 0.1%
-
Optical
Sighting
Laser targeting light (maximum power level < 1 mW, λ = 630 to 680 nm, CDRH class II) or through lens viewfinder
Optics
Four focusable optics
Distance Ratio (FOV)
150:1 (minimum 0.9 mm)
-
Interface and Communication
Display
Built-in LCD Display
Parameters
Adjustable at the instrument or via serial interface: emissivity; exposure time; analog output; address; baud rate; waiting period; °C or °F; setting of the maximum value storage; temperature subrange
Analog Output
Linear 0 to 20 mA or 4 to 20 mA, DC, switchable; load max 500 Ohm
Digital Interface
Switchable Inside the Pyrometer: RS232 or RS485 addressable, half duplex
Baud Rate: Up to 115 kBd -
Environmental Specifications
Protection Class
IP65 (DIN 40 050)
Ambient Temperature
0 to 53°C (32 to 127.4°F) at housing
Storage Temperature
-20 to 60°C (-4 to 140°F)
Relative Humidity
Non-condensing conditions
Weight
~0.550 kg (~1.21 lb)
L x W x D
195 x 56 x 62.5 mm (7.68 x 2.20 x 2.46 in)
Housing
Stainless steel
CE Label
According to EU directives about electromagnetical immunity
-
Electrical
Power Supply
24 VAC/DC (14 to 30 VAC/DC) (AC: 48 to 62 Hz)
Power Consumption
Maximum 6 VA
Isolation
Power supply, digital interface, and analog output are galvanically isolated against each other and housing
-
Typical Applications
- Preheating
- Annealing
- Tempering
- Welding
- Forging
- Hardening
- Sintering
- Melting
- Soldering
- Rolling
- Brazing
- Normalizing
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Data Sheets
Brochures
Manuals
Application Notes
Accessories
Global Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Warranties
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
Product Support
Call
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Email
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).