Temperature Measurement Products
Mikron M390S
Two-Piece Calibration Source with Very Quick Heat-Up Time, 600 to 3000°C
Advanced Energy’s Mikron M390S ultra-high temperature blackbody calibrator easily achieves high emissivity targets and stabilizes at your required temperature within a few minutes of turn-on.
- Exceptional accuracy at high temperatures
- ± 0.25% of reading ± 1°C
- High effective emissivity of 1.0 between 0.65 to 1.8 µm
- Rapid warm-up/cool-down time — only five minutes from ambient to 2300°C
- Overview
- Technical Specs
- Documents
- Service & Support
- Distributors
Overview
The Mikron® M390S ultra-fast high temperature blackbody calibrator is identical to the M390 in capabilities. But it is a two-part blackbody comprised of a controller section and an emitter section.
Its cavity is a graphite tube target and is available with 25 mm (1 in) aperture that showcases an effective emissivity of 1.0 from 0.65 to 1.8 µm. Target temperature is sensed by a rapid response infrared thermometer and a PID controller regulates the target temperature precisely to your desired value. The controller is mounted on the calibration source and remote set point programming is available via an RS232 communication port.
Benefits
- Quickly stabilize at your required temperature
- Achieve high accuracy and repeatability
- Rapidly warm up and cool down — only five minutes from ambient to 2300°C
- Easily access all safety features
- Meet rigid quality control standards
Features
- PID controller regulates target temperature precisely to desired value
- Remote calibration set point control via RS232
- ±0.25% of reading ±1°C
- High effective emissivity of 1.0 between 0.65 to 1.8 µm
- Furnished with certification of calibration traceable to NIST
-
Measurement Specifications
Temperature Range
600 to 3000°C (1112 to 5432°F) custom split design
Temperature Uncertainty
±0.25% of reading ±1°C
Temperature Resolution
1°C
Stability
±1°C
Source Non-Uniformity
±0.1% ±1°C of reading within the center ½ of diameter
Heated Emitter Shape
Closed end graphite tube 292 mm (11.5 in) long with approximately 127 mm (5 in) heated length
Exit Port Diameter
25 mm (1.0 in)
Emissivity
1.0 (effective from 0.6 to 1.8 µm)
~0.96 (effective from 3 to 15 µm)Standard Calibration Method
Pyrometric
Temperature Sensor
Impac infrared thermometer
Warm-Up Time
5 minutes from ambient to 2300°C
Slew Rate to 1°C Stability
6 to 7 minutes from 600 to 2300°C
-
Communication / Interface
Remote Set Point
Via RS232
Method of Control
Digital PID controller
-
Environmental Specifications
Operating Ambient Temperature
0 to 44°C (32 to 110°F)
Cooling
Water-cooled; standard (garden) hose connection on rear, 3.8 lpm (1 gpm minimum)
Operating Humidity
0 to 90% RH non-condensing
H x W x D
Blackbody: 87.6 x 55.9 x 97.8 cm (34.5 x 22.0 x 38.5 in)
Controller: 19 in rack mount, 17.8 x 46 cm (7 x 18 in)Weight
Blackbody: ~177 kg (390 lb)
Controller: 4.6 kg (10.2 lb)CE Certified
Yes, by similar design
-
Electrical
Power Requirements
208 to 240 VAC at 50 and 60 Hz
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Helpful Links
Global Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Warranties
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
Product Support
Call
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Email
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).