Temperature Measurement Products

Mikron M390

Ultra-fast Blackbody Calibration Sources, 300 to 3000°C

Advanced Energy’s M390 ultra-fast high temperature blackbody calibrator can produce very high temperatures and meet high emissivity targets. It can quickly stabilize within a few minutes.

  • Exceptional accuracy at high temperatures
  • ±0.25% of reading ±1°C
  • Effective emissivity of 1.0 between 0.65 to 1.8 µm
  • Rapid warm-up/cool-down time — only five minutes from ambient to 2300°C
  • Overview
  • Technical Specs
  • Documents
  • Service & Support

Overview

The Mikron® M390 blackbody calibrator quickly produces high temperature, high emissivity targets, and stabilizes at your required temperature in minutes.

The cavity is a graphite tube target with a 25 mm (1 in) diameter and has an effective emissivity of 1.0 from 0.65 to 1.8 µm. Target temperature is sensed by a rapid response infrared thermometer and the PID controller to regulates the target temperature to your desired value.

The controller is mounted on the calibration source and remote set point programming is available via the standard RS232 communication port.

Benefits

  • Quickly stabilize at your required temperature
  • Achieve high accuracy and repeatability
  • Rapidly warm up and cool down—only 5 minutes from ambient to 2300°C
  • Easily access all safety features
  • Meet rigid quality control standards

Features

  • PID controller regulates target temperature precisely to desired value
  • Remote calibration set point control via RS232
  • ±0.25% of reading ±1°C
  • High effective emissivity of 1.0 between 0.65 to 1.8 µm
  • Furnished with certification of calibration traceable to NIST
  • Measurement Specifications

    Temperature Range

    M390-A2

    600 to 2300°C (1112 to 4172°F)

    M390-B2

    600 to 2600°C (1112 to 4712°F)

    M390-C2

    600 to 3000°C (1112 to 5432°F)

    M390-L1

    300 to 2000°C (572 to 3632°F)

    NIST traceable calibration up to 2700°C
    Temperatures > 2700°C are provided on a ‘best effort’ basis only

    Temperature Uncertainty

    ±0.25% of reading ±1°C
    Accuracy calibration performed radiometrically, the uncertainty of emissivity and transfer standard are already included

    Temperature Resolution

    1°C

    Stability

    ±1°C
    Provided stable AC mains voltage and minimum airflow across the exit port or emitter plate

    Source Non-Uniformity

    ±0.1% ±1°C of reading within the center ½ of diameter

    Heated Emitter Shape

    Closed end graphite tube 292 mm (11.5 in) long with approximately 127 mm (5 in) heated length (field replaceable)

    Exit Port Diameter

    25 mm (1 in)

    Emissivity

    1.0 (effective from 0.6 to 1.8 μm)
    ~0.96 (effective from 3 to 15 μm)

    Standard Calibration Method

    Radiometric

    Temperature Sensor

    Custom Impac infrared thermometer IGA 6

    Warm-up Time

    5 minutes from 600 to 2300°C, typical

    Slew Rate to 1°C Stability

    ~325°C per minute 600 to 1100°C
    ~700°C per minute T > 1100°C

  • Communication / Interface

    Remote Set Point

    RS232 serial communication output standard,
    RS485 optional

    Method of Control

    Digital PID Controller

  • Environmental Specifications

    Operating Ambient Temperature

    0 to 44°C (30 to 110°F)

    Cooling

    Water cooled. Standard (garden) hose connections on rear, 3.8 lpm (1 gpm minimum, 2 gpm recommended)

    Operating Humidity

    0 to 90% RH non-condensing

    H x W x D

    1710 x 560 x 820 mm (67.3 x 22 x 32.3 in)

    Weight

    182 kg (400 lb)

    CE Certified

    Yes

  • Electrical

    Power Requirements

    M390-A2: 15k VA 1 ph
    M390-B2: 15k VA 1 ph
    M390-C2: 24k VA 1 ph
    M390-L1: 15k VA 1 ph

    208 to 230 VAC at 50 and 60 Hz, 15k VA or 24k VA (depends on model)

Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.

Global Support & Services

Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.

Learn More

Applications Support & Consulting

Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.

Learn More

Warranties

Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.

Learn More

Product Support

Call
Inside the U.S.: 1.800.446.9167 (option 2)
Outside the U.S.


Email
Thin Film Support
Thermal Product Support
Other Technical Support

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.