High Voltage Products

Trek PD07016

Non-Inverting High Voltage Amplifier, Output Voltage 0 to ±10 kV DC or Peak AC

With its solid-state design, high slew rate, extensive bandwidth, and low noise operation, Advanced Energy’s DC-stable Trek PD07016 high voltage amplifier is a smart choice for automated and controlled systems, or for providing feedback signals in a closed-loop system.

  • Output Voltage Range: 0 to ±10 kV DC or peak AC
  • Output Current Range: 0 to ±60 mA DC, 0 to ±300 mA peak capability for 20 µs
  • Slew Rate: Greater than 1000 V/µs
  • Large Signal Bandwidth: DC to greater than 10 kHz (2% distortion)
  • Gain: 1000 V/V
  • Overview
  • Technical Specs
  • Documents
  • Service & Support

Overview

The non-inverting Trek® PD07016 high voltage amplifier has a fixed gain of 1000 V/V. It is protected against over-voltage and over-correct conditions generated by active loads or output short circuits to the ground. Precision voltage and current indicators provide low voltage representations of the high voltage output and load current for monitoring or use as feedback signals in a closed-loop system.

Benefits

  • Benefit from a closed-loop system and achieve high accuracy
  • Take advantage of complete solid-state design and maintenance-free operation
  • Rely on ultra-accurate outputs thanks to low-output noise
  • Protect against overvoltage and overcurrent conditions generated by active loads
  • Drive capacitive loads via a four-quadrant output

Features

  • Dynamic adjustment capabilities to optimize the AC response for various load parameters
  • Inverting and differential options available
  • NIST-traceable calibration certificate provided with each unit
  • DC-stable for programmable supply applications
  • CE compliant (230 VAC unit only)

Select specifications are shown below. Please see product data sheet for additional specifications.

  • Performance

    Output Voltage Range

    0 to ±10 kV DC or peak AC

    Output Current Range

    0 to ±60 mA DC, 0 to 300 mA peak capability for 20 μs

    Gain

    1000 V/V

    Slew Rate

    Greater than 1000 V/μs (10% to 90%, typical)

    Large Signal Bandwidth

    DC to greater than 10 kHz (2% distortion)

  • Voltage Monitor

    Ratio

    1 V / 1000 V

    DC Accuracy

    Better than 0.1% of full scale

    DC Offset Voltage

    Less than ±5 mV

    Output Noise

    Less than 20 mV rms
    (Measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter)

    Output Impedance

    47 Ω

  • Current Monitor

    Ratio

    30 V/mA

    DC Accuracy

    Better than 2% of full scale

    Offset Voltage

    Less than ±10 mV

    Output Noise

    Less than 30 mV rms
    (Measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter)

    Bandwidth (-3dB)

    DC to greater than 5 kHz

    Output Impedance

    47 Ω

  • Mechanical

    Dimensions

    91.4 x 43 x 87 cm (36 x 17 x 34 in)
    (Depth dimension includes handles and spacing for air flow)

    Weight

    Approximately 73 kg (160 lb)

  • Electrical

    Line Voltage

    Factory set for one of two ranges:104 to 127 VAC or 180 to 250 VAC at 48 to 63 Hz (specify when ordering)

    Power Consumption

    1800 VA, maximum

    AC Line Receptacle

    Standard 3-prong with integral fuse holder

  • Operating Conditions

    Temperature

    0 to 40°C (32 to 104°F)

    Relative Humidity

    To 75%, non-condensing

    Altitude

    To 1524 meters (5000 ft)

  • Typical Applications

    • Automated or computer controlled systems
    • Providing feedback signals in closed-loop systems

Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.

Global Support & Services

Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.

Learn More

Applications Support & Consulting

Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.

Learn More

Warranties

Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.

Learn More

Product Support

Call
Inside the U.S.: 1.800.446.9167 (option 2)
Outside the U.S.


Email
Thin Film Support
Thermal Product Support
Other Technical Support

Contact Us

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.