High Voltage Products

Trek 609B-3

High Voltage Power Amplifier for Industrial and Research Applications

Advanced Energy’s Trek 609B-3 DC-stable high voltage power amplifier features an all solid-state design for a high slew rate, wide bandwidth, and low noise operation

  • Four-quadrant output for driving capacitive loads
  • Closed-loop system for high accuracy
  • Short-circuit protected for equipment protection
  • DC-stable for programmable supply applications
  • Low output noise for ultra-accurate outputs
  • Overview
  • Technical Specs
  • Documents
  • Accessories
  • Service & Support
  • Distributors

Overview

The Trek® 609B-3 is a DC-stable high voltage power amplifier. The four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout the output voltage range. This output is essential to achieve accurate output responses and high slew rates demanded by highly capacitive
or reactive loads. It is configured as a non-inverting amplifier, an inverting amplifier, or as a differential amplifier. Different input configurations can be wired into the unit.

Benefits

  • Achieve accurate output response and high slew rate for highly capacitive or reactive loads
  • Protect equipment with short-circuit protection
  • Utilize in programmable supply applications with DC-stable device
  • Increase accuracy with a closed-loop system

Features

  • Configurable as a non-inverting amplifier, inverting amplifier, or as a differential amplifier
  • Available factory set line voltage of 100 VAC, 115 VAC, or 230 VAC at 48 to 63 Hz
  • All-solid-state design for a high slew rate, wide bandwidth, and low noise operation
  • Four-quadrant output for driving capacitive loads
  • NIST-traceable calibration certificate provided with each unit

Select specifications are shown below. Please see product data sheet for additional specifications.

  • Performance

    Output Voltage Range

    0 to ±10 k VDC or peak AC

    Output Current Range

    0 to ±2 m ADC or peak AC

    Gain

    1000 V/V

    Slew Rate

    Greater than 30 V/μs (10% to 90%, typical)

    Large Signal Bandwidth

    DC to greater 400 Hz (1% distortion)

  • Voltage Monitor

    Ratio

    1/1000th of the high-voltage output signal

    DC Accuracy

    Better than 0.1% of full scale

    DC Offset Voltage

    Less than ±5 mV

    Output Noise

    Less than 5 mV rms
    Measured using the true rms feature of the HP Model 34401A digital multimeter

    Output Impedance

    47 Ω

  • Mechanical

    Dimensions

    149 x 434 x 370 mm (5.9 x 17 x 14.3 in)

    Weight

    11 kg (24 lb)

  • Electrical

    Line Voltage

    Factory set for one of three ranges (specify when ordering): 100 VAC, 115 VAC or 230 VAC at 48 to 63 Hz

  • Operating Conditions

    Temperature

    0 to 40°C (32 to 104°F)

    Relative Humidity

    To 85%, non-condensing

    Altitude

    To 2000 m (6561.68 ft)

  • Typical Applications

    • AC or DC biasing
    • Atmospheric plasma
    • Dielectric barrier discharge
    • Electroactive polymers (EAP)
    • Electrophoresis, electrophotography
    • Electrorheological fluids
    • Electrostatic deflection
    • Electro-optic modulation
    • Ferroelectric material characterization
    • Ion beam steering
    • Mass spectrometers
    • Material poling and particle accelerators

Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.

Accessories

Amplifier Selection Calculator

To help you select the appropriate Trek amplifier, we created this calculator. It uses peak-to-peak voltage to help calculate values associated with driving capacitive loads. If you have any difficulty with this software or would rather not do the download, please use the step-by-step calculator procedure.

Documents & Support

View All Trek 609B-3 Accessories

Global Support & Services

Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.

Learn More

Applications Support & Consulting

Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.

Learn More

Warranties

Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.

Learn More

Product Support

Call
Inside the U.S.: 1.800.446.9167 (option 2)
Outside the U.S.


Email
Thin Film Support
Thermal Product Support
Other Technical Support

 

Find an AE Representative or Distributor

To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).

Contact Us

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.