High Voltage Products

Trek 601C

DC-Stable High Voltage Amplifier

Advanced Energy’s DC-stable Trek 601C high voltage amplifier can have up to two independent amplifier channels in one enclosure.

  • Output Voltage: See tech specs
  • Output Current: See tech specs
  • Slew Rate: Greater than 50 V/μs
  • Large Signal Bandwidth: DC to greater than 30 kHz (1% distortion)
  • Gain: 100 V/V (other options available)
  • Overview
  • Technical Specs
  • Documents
  • Service & Support

Overview

The Trek® 601C high voltage amplifier provides precise control of output voltages and offers high slew rates, extensive bandwidth, and low-noise operation. It can feature up to two independent amplifier channels in one enclosure and is highly reliable thanks to its all-solid-state design.

The Trek 601C’s four-quadrant, active output sinks or sources current into reactive or resistive loads making it an ideal choice when you need accurate output responses and high slew rates demanded by reactive loads. Applications such as drive piezoelectric actuators, modulate electro-optics, and electrostatically controlled ion beams are typical uses for the Trek 601C.

Benefits

  • Operate as non-inverting or inverting with fixed gain
  • Dynamically adjust to optimize the AC response for various load parameters
  • Specify output voltages (three range options available)
  • Utilize precision voltage and current monitors
  • Drive capacitive loads with four-quadrant output

Features

  • Different output voltage ranges, input configurations, and voltage gain ratios available
  • Remote access
  • DC accuracy is better than 0.1% of full-scale
  • CE compliant for assured reliability
  • NIST-traceable calibration certificate provided with each unit

Select specifications are shown below. Please see product data sheet for additional specifications.

  • Performance

    Output Voltage Range

    0 to ±500 V, 0 to -1 kV
    0 to +1 kV DC or peak AC

    Output Current Range

    0 to ±10 mA DC
    0 to ±20 mA peak AC

    Gain

    100 V/V (a gain of 50 V/V is available for the ±500 V range only)

    Slew Rate

    Greater than 50 V/μs (10% to 90%, typical)

    Large Signal Bandwidth

    DC to greater than 8 kHz (1% distortion)

  • Voltage Monitor

    Ratio

    1/100th of the high-voltage output

    DC Accuracy

    Better than 0.1% of full scale

    DC Offset Voltage

    Less than ±5 mV

    Output Noise

    Less than 10 mV rms
    (Measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter)

    Output Impedance

    0.1 Ω

  • Current Monitor

    Ratio

    0.5 V/mA

    DC Accuracy

    Greater than 1% of full scale

    Offset Voltage

    Less than ±10 mV

    Output Noise

    Less than 20 mV rms
    (Measured using the true rms feature of the Hewlett Packard Model 34401A digital multimeter)

    Output Impedance

    0.1 Ω

  • Mechanical

    Dimensions

    Single Channel: 222.3 x 108 x 335 mm (8.75 x 4.25 x 13.2 in)
    Double Channel: 433.8 x 108 x 335 mm (17 x 4.25 x 13.2 in)

    Weight

    Single Channel: 4.3 kg (9.4 lb)
    Double Channel: 8.6 kg (18.8 lb)

  • Electrical

    Line Voltage

    Factory Set for one of two ranges: 90 to 127 VAC or 180 to 250 VAC, either at 48 to 63 Hz

    Power Consumption

    150 VA, maximum

  • Operating Conditions

    Temperature

    0 to 40°C (32 to 104°F)

    Relative Humidity

    To 85%, non-condensing

    Altitude

    To 2000 meters (6561.68 ft)

  • Typical Applications

    • Driving piezoelectric actuators
    • Modulating electrooptics
    • Electrostatically controlling ion beams
    • Providing remote ON/OFF capabilities for automated or computer controlled systems

Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.

Data Sheets

Global Support & Services

Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.

Learn More

Applications Support & Consulting

Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.

Learn More

Warranties

Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.

Learn More

Product Support

Call
Inside the U.S.: 1.800.446.9167 (option 2)
Outside the U.S.


Email
Thin Film Support
Thermal Product Support
Other Technical Support

Contact Us

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.