- Gas Sensors
- OEM Gas Analyzers
- Andros 6511
OEM Gas Analyzer for Greenhouse Gas Detection and Monitoring
- Superior performance and reliability
- Enhanced optics and electronics
- Highly accurate calibration
- Extensive software architecture
- Rapid warm-up
- Technical Specs
- Service & Support
Advanced Energy’s Andros® 6511 gas analyzer / non-dispersive infrared (NDIR) bench is individually calibrated for operation from 0 to 50°C over the range of specified concentrations. Results are stored within the system to provide accurate analysis.
After the initial warm-up, enhanced optics and electronics virtually eliminate zero drift and feature precision-beam collimation. A comprehensive operating system allows you to tailor the device to multiple operations. And calculations are performed in realtime for transmission to your host system.
- Measure up to five gases
- Tailor to multiple operations without the need for a custom operating system
- Nearly eliminate zero drift after the initial warm-up period
- Meet all accuracy specifications
- Exceed performance requirements for portable or fixed leak detectors of toxics or combustibles
- RS232 output
- Differential Pressure for flow monitoring
- Low power
- Fast response times
- Precision-beam collimation
Specified at a sample flow rate of 1 liter per minute through the 6511 sample cell
Data Refresh Rate
30 minutes fully stable, 3 minute for reduced accuracy unless zeroed prior to taking measurement
USB or RS232C asynchronous serial; 19,200 bps or 9600 bps (default is 19,200)
+12 Volts DC nominal (+9 to +16)
1.8 W average at 12 VDC
L x W x H
19.18 x 7.37 x 5.03 cm (7.55 x 2.90 x 1.98 in)
0.3 kg (0.8 lb)
Operating Temperature Range
0 to 70°C (32° to 158°F), accuracy not specified > 50°C
To 95% RH (non-condensing)
-300 to 3000 m (-1000 to 10,000 ft)
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Global Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).