High Voltage Products
Trek 5/80
Non-Inverting High Voltage Amplifier, Output Voltage 0 to ±5 kV DC or Peak AC
Advanced Energy's Trek 5/80 high voltage power amplifier showcases high slew rates, impressive bandwidth, and low-noise operation.
- Output Voltage: 0 to ±5 kV DC or peak AC
- Output Current: 0 to ±80 mA DC or peak AC
- Slew Rate: Greater than 1000 V/µs
- Large Signal Bandwidth: DC to greater than 60 kHz (-3dB)
- Gain: 1000 V/V Fixed
- Overview
- Technical Specs
- Documents
- Accessories
- Service & Support
- Distributors
Overview
The DC-stable Trek 5/80 non-inverting, high voltage power amplifier can be used in various industrial and research applications including mass spectrometry, ion beam steering, and AC or DC biasing. Its four-quadrant, active output stage sinks or sources the current into reactive or resistive loads throughout the output voltage range. This allows you to achieve accurate output responses and high slew rates demanded by highly capacitive or reactive loads.
Benefits
- Achieve high accuracy with a closed-loop system
- Drive capacitive loads via a four-quadrant output
- Rely on ultra-accurate outputs thanks to low-output noise
- Safeguard equipment with short-circuit protection
- Save costs thanks to maintenance-free operation and an all-solid-state design
Features
- Dynamic adjustment capabilities to optimize the AC response for various load parameters
- NIST-traceable calibration certificate provided with each unit
- DC-stable for programmable supply applications
- CE compliant (230 VAC unit only)
- Local and remote high voltage ON/OFF capabilities
Select specifications are shown below. Please see product data sheet for additional specifications.
-
Performance
Output Voltage Range
0 to ±5 kV DC or peak AC
Output Current Range
0 to ±80 mA DC or peak AC
Gain
1000 V/V
Slew Rate (10 to 90%, typical)
Greater than 1000 V/µs
Large Signal Bandwidth
DC to greater than 60 kHz
-
Voltage Monitor
Ratio
1/1000th of the high voltage output signal
DC Accuracy
Better than 0.1% of full scale
DC Offset Voltage
Less than ±2 mV
-
Current Monitor
Ratio
0.1 V/mA
DC Accuracy
Better than 1% of full scale
Offset Voltage
Less than ±10 mV
-
Mechanical
H x W x D
279 x 482 x 654 mm (11 x 19 x 25.75 in)
Weight
24 kg (55 lb)
-
Electrical
Line Voltage
Factory set for one of two ranges: 104 to 127 VAC or 180 to 250 VAC, either at 48 to 63 Hz
Power Consumption
1000 VA, maximum
AC Line Receptacle
Standard three-prong AC line connector
-
Operating Conditions
Temperature
0 to 40°C (32 to 104°F)
Relative Humidity
To 85%, non-condensing
Altitude
To 2000 meters (6561.68 ft.)
-
Typical Applications
- AC or DC biasing
- Atmospheric plasma
- Dielectric barrier discharge
- Electroactive polymers (EAP)
- Electrophoresis, electrophotography
- Electrorheological fluids
- Electrostatic deflection
- Electro-optic modulation
- Ferroelectric material characterization
- Mass spectrometers
- Material poling and particle accelerators
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Accessories
Documents & Support
View All Trek 5/80 AccessoriesGlobal Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Warranties
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
Product Support
Call
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Email
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).