550 to 1400°C (MB 14)
600 to 1600°C (MB 16)
650 to 1800°C (MB 18)
550 to 1800°C (MB 18L)
750 to 2500°C MB 25)
900 to 3300°C (MB 33)
650 to 1400°C (MB 14, forging version)
750 to 3500°C (MB 35L)
1100 to 3500°C (MB 35L, 0.676 µm version)
1000 to 2000°C (MB 20, 0.55 µm version)

300 to 1300°C (MB 13)
350 to 1800°C (MB 18)
450 to 2500°C (MB 25)
220 to 1150°C (MB 11.5L) 
250 to 1350°C MB 13.5L)
300 to 2000°C (MB 20L)
350 to 2500 °C (MB 25L)
300 to 3000 °C (MB 30L)

Any range adjustable within the temperature range, minimum span 51°C

IS 140: 0.7 to 1.1 µm
IGA 140: 1.45 to 1.8 µm

Up to 1500°C: 0.3% of reading in °C + 1°C;
Above 1500°C: 0.5% of reading in °C
ε = 1, t₉₀ = 1 s, T_amb. = 23°C

0.1% of reading in °C + 1°C
ε = 1, t₉₀ = 1 s, T_amb. = 23°C

< 1 ms, adjustable up to 10 s (“L” temperature ranges: with dynamical adaption at low signal levels)

10.0 to 100.0% adjustable via interface in steps of 0.1%

Through lens view finder or laser targeting light (maximum power level < 1 mW, l = 630 to 680 nm, CDRH class II)

Three focusable optics

Minimum 380:1 (minimum 0.35 mm)

Built-in digital display

Adjustable at the instrument or via serial interface: emissivity, response time, analog output, address, baud rate, waiting period t_W, temperature unit °C or °F, setting of the maximum value storage, temperature subrange

Adjustable 0 to 20 mA or 4 to 20 mA, linear (via digital interface)

Switchable inside the pyrometer: RS232 or RS485 addressable, half duplex; baud rate up to 115 kBd
Alternatively: Profibus, Profinet, or Ethernet

IP65 (DIN 40 050)

0 to 70°C (32 to 158°F) at housing

-20 to 80°C (-4 to 176°F)

Approximately 0.55 kg (1.21 lb)

According to EU directives about electromagnetic immunity

24 VAC/DC (14 to 30 VAC/DC) (AC: 48 to 62 Hz)

Maximum 2 VA

Power supply, digital interface, analog output are galvanically isolated against each other and housing

• Preheating
• Annealing
• Tempering
• Welding
• Forging
• Hardening
• Sintering
• Melting
• Soldering
• Rolling
• Brazing
• Normalizing