Temperature Measurement Products

Impac 8 pro Series

Portable, Digital Pyrometers for Non-Contact Temperature Measurement, 250 to 2500°C

Advanced Energy’s battery-driven Impac series 8 pro pyrometers offer wide temperature ranges and high accuracy. The series features Impac IS 8 pro, IGA 8 pro, and IS-8GS pro.

  • Fully digital signal processing
  • Integrated graphic display
  • Bright, optimized viewfinder with exact spot indication
  • Aluminum die-cast housing for harsh condition
  • Short response times and quick detection of temperature differences
  • Overview
  • Technical Specs
  • Documents
  • Accessories
  • Service & Support

Overview

The Impac® series 8 pro pyrometers are high-quality, battery-driven portables for non-contact temperature measurement. Thanks to full digital processing, they offer wide temperature ranges and high accuracy and measuring results can be shown and analyzed directly on site.

For high temperatures, the Impac IS 8 pro is available in two temperature ranges between 600 and 2500°C. For medium temperatures, the Impac IGA 8 pro offers a range from 250 to 1600°C. The Impac IS 8-GS pro is a special version for use in foundries.

Benefits

  • Use daily in rough industrial conditions
  • Easily adjust to small spot sizes
  • Enable short response times (1 ms) for exact measurement of fast-moving objects
  • Store large amounts of measuring data for subsequent analysis

Features

  • Very robust aluminum die-cast housing for use in harsh environments
  • Focusable precision optics for adjusting to the smallest spot sizes
  • Temperature display on the housing, in the viewfinder and on the multifunctional display
  • Integrated maximum value storage to determine the peak value achieved during a measuring series
  • USB interface for using the optional analyzing software PortaWin

Select specifications are shown below. Please see product data sheet for additional specifications.

  • Temperature Ranges

    IS 8 pro

    600 to 1800°C (MB 18)
    750 to 2500°C (MB 25)

    IS 8-GS pro

    1000 to 2000°C (MB 20)

    IGA 8 pro

    250 to 1600°C (MB 16)
    280 to 2000°C (MB 20)

  • Measurement

    Spectral Ranges

    IS 8 pro: 0.78 to 1.1 µm
    IS 8-GS pro: 0.55 µm
    IGA 8 pro: 1.45 to 1.8 µm

    Measurement Uncertainty

    0.4% of reading +1°C
    ε = 1, Tamb. = 23°C

    Repeatability

    0.1% of reading or 0.8°C
    The larger value is valid; ε = 1, Tamb. = 23°C

    Exposure Time t90

    1 ms
    (IS 8-GS pro: 0.5 s)

    Emissivity ε

    Adjustable from 10 to 100% in 0.1% steps

  • Optical

    Sighting

    Optimized through-lens viewfinder with dioptry correction -2.5 to +3 dpt, indication circle for measuring spot

    Optics

    Achromatic, adjustable from a = 500 mm to ∞ (with close-up lens: a = 250 mm to 500 mm)
    Effective Lens Aperture Diameter D: 20 mm (distance ∞) to 25 mm (distance 500 mm)
    View Magnification: 3x, angle of view: 10°

    Distance Ratio (FOV)

    IS 8 pro: Minimum 500:1 (1 mm)
    IS 8-GS pro: 180:1 (2.8 mm)
    IGA 8 pro: Minimum 310:1 (1.6 mm)

  • Interface and Communication

    Display

    Serial Interface

    USB 2.0 (supplies the instrument when connected, but without battery charging function)

    Parameters

    Emissivity, direct emissivity setting; storage interval, temperature indication in °C or °F

  • Environmental

    Protection Class

    IP52 (housing, exclude handle with battery case), IP40 (handle)

    Ambient Temperature

    0 to 50°C (32 to 122°F)

    Storage Temperature

    -10 to 65°C (32 to 149°F)

    Relative Humidity

    Non-condensing conditions

    Weight

    1.2 kg (2.65 lb) with batteries

    L x W x H

    210 x 75 x 175 mm (8.27 x 2.95 x 6.89 in)

    Housing

    Aluminum (housing), polyamide (handle)

    CE label

    According to EU directives about electromagnetical immunity

  • Electrical

    Power Supply

    6 x 1.5 V alkali-manganese IEC LR6 or 6 x 1.2 V rechargeable batteries
    Uninterrupted operation time approximately 35 hours with alkali-manganese batteries

  • Typical Applications

    • Steel and metal making: Coke oven, stove dome, blast furnace, and pouring stream
    • Steel and metal forming: Hot rolling/rolling mills, hot forming, casting and forging, continuous casting
    • Glass applications: Glass melting furnace, glass foreherth and feeder, and glass mold temperature measurement

Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.

Accessories

TQCS Software

Temperature Quality Control System for Recording and Archiving

PortaWin

Portable Pyrometer Analyzing Software (Series 8 and Series 15)

Global Support & Services

Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.

Learn More

Applications Support & Consulting

Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.

Learn More

Warranties

Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.

Learn More

Product Support

Call
Inside the U.S.: 1.800.446.9167 (option 2)
Outside the U.S.


Email
Thin Film Support
Thermal Product Support
Other Technical Support

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.