- Temperature Measurement Products
- Non-Metal Applications Pyrometers
- Impac 600 Series
Temperature Measurement Products
Impac 600 Series
Digital, Modular Pyrometer with Exchangeable Sensor Heads for Non-Contact Temperature Measurement
Advanced Energy's Impac 600 Series is a modular, digital pyrometer that provides a highly customizable design with easy installation and maintenance.
- The long-wavelength IN 600 sensor head is best suited for measurements of non-metallic or coated metallic objects.
- The IS 600, IGA 600, and IGA 600/23 sensor heads use short wavelengths for measurements of metals, ceramics, or graphite.
- The IN 600/5 sensor head is specifically designed to measure the temperature of glass surfaces.
- Technical Specs
- Service & Support
The Impac® 600 series is a digital, modular pyrometer that provides a highly customizable design with easy installation and maintenance. The long-wavelength IN 600 is best suited for non-contact temperature measurement on non-metallic or coated metallic objects. The IS 600, IGA 600, and IGA 600/23 use short wavelengths for measurements of metals, ceramics, or graphite. The IN 600/5 is specifically designed to measure the temperature of glass surfaces.
The modular concept allows for various combinations of system components: converter box, sensor heads, and multi-sensor box. The standard configuration includes an electronic converter box, a sensor cable, and a removable sensor head to allow for easy exchange. Each converter box can connect up to two sensor heads or up to two optional multi-sensor boxes that connect up to four sensor heads each. To ensure maximum flexibility, the system allows for any combination of the available sensor heads, even with different wavelengths.
- Install in harsh industrial environments
- Removeable sensor heads for easy exchange without the need to remove the complete sensor cable and without recalibration
- Connection of up to 8 sensor heads to one converter box (8 measuring points in one pyrometer system). If wanted, sensor heads with different wavelengths can be connected to the same converter box
- Converter box available with or without display
- Optional multi-sensor box
- Optional communications: analog and/or RS-232/RS-485 and/or Profinet
Select specifications are shown below. Please see product data sheet for additional specifications.
-40 to 700°C (−40 to 1292 °F), MB 7
550 to 1400 °C (1022 to 2552 °F), MB 14
650 to 1800 °C (1202 to 3272 °F), MB 18
700 to 2500 °C (1292 to 4532 °F), MB 25
250 to 1200 °C (482 to 2192 °F), MB 12
370 to 1800 °C (698 to 3272 °F), MB 18
400 to 2500 °C (752 to 4532 °F), MB 25
100 to 1000 °C (212 to 1832 °F), MB 10
150 to 1800 °C (302 to 3272 °F), MB 18
100 to 1300 °C (212 to 2372 °F), MB 13
400 to 2500 °C (752 to 2532 °F), MB 25
Adjustable; minimum range 51°C
IN 600： 8 to 14 µm
IS 600：0.7 to 1.1 µm
IGA 600：1.45 to 1.8 µm
IGA 600/23：2 to 2.6 µm
IN 600/5：5.14 µm
IN 600 & IN 600/5: 0.5% of measured °C value or 0.8°C, whichever value is greater
IS 600, IGA 600, & IGA 600/23: 0.25% of measured °C + 1 °C
The larger value is valid. The sensor head must be in constant ambient temperature for at least 15 minutes
10 to 120% adjustable in steps of 0.1%
Optics (Distance Ratio)
IN 600 & IN 600/5: 2:1, 10:1, or 20:1
IS 600: 65:1
IGA 600 & IGA 600/23: 70:1
Interface and Communication
Selectable: linear current (0 or 4 to 20 mA), voltage (0 to 5 V), or thermocouple (type J or K)
Digital Interface (optional)
RS-232/RS-485 (switchable) or Profinet
Color LCD (262,000 colors)
Sensor heads (standard): 0 to 80 °C (32 to 176 °F)
Converter box: 0 to 65 °C (32 to 149 °F)
Analog box: 0 to 70 °C (32 to 158 °F)
Converter box: -20 to 70 °C (-4 to 158 °F), with non-condensing conditions.
Sensor head, sensor cables, multi-sensor box, and analog box: -20 to 85 °C (-4 to 185 °F), with non-condensing conditions
10 to 95%, non-condensing
Standard sensor heads: ~40 g (~1.4 oz)
Direct USB connector: ~70 g (~2.5 oz)
Converter box with display: ~395 g (~13.9 oz)
Converter box without display: ~380 g (~13.4 oz)
Multi-sensor box: ~260 g (~9.2 oz)
Single analog box: ~300 g (~10.6 oz)
Multi analog box: ~400 g (~14.1 oz)
Sensor Head: Stainless steel
5 VDC (when connected via USB) or 10 to 30 VDC, ripple < 0.5 V, current consumption dependent on
Max 500 Ω
Non-metallic or coated metallic objects (IN 600)
Metals, ceramics, or graphite (IS 600, IGA 600, and IGA 600/23)
Glass surfaces (IN 600/5)
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Documents & SupportView All Impac 600 Series Accessories
Global Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).