-20°C to 150°C

Standard radiometric calibration: ±1°C at 8 to 14 µm
Optional thermometric calibration: ±0.1°C (only on 14750-4C and 14750-5C)
Accuracy is defined for an ambient temperature of 18 to 23°C

0.1°C

±0.1°C per 8-hour period
Provided stable AC mains voltage and minimum air flow across the exit port or emitter plate

±0.2°C less than 100°C, ±1.3°C greater than 100°C
Emitter uniformity is defined for 1.6” (40 mm) diameter of the central area

Flat plate

51 mm (2 in)

Radiometric calibration: 1.0 at 8 to 14 µm
Thermometric calibration: ~ 0.98

Standard: Radiometric (pyrometric)
Optional:  Thermometric (only on 14750-4C and 14750-5C)

Precision platinum RTD

~ 6 minutes from ambient to -15°C or 100°C
Typical — can vary from unit to unit

~ 40° per minute from ambient to 150°C
~ 20° per minute 20 to 10°C
~ 3° per minute from -10 to -20°C
Typical — can vary from unit to unit

Approximately 2 minutes between Δ 10°C setpoints (slightly longer T < -10°C)

Via RS232

Digital self tuning PID controller

5 to 40°C
To achieve low temperature set point of -20°C, ambient must be ≤25°C (77°F).

Peltier Modules for heating and cooling

90% RH max, non-condensing in heating mode. Environment dew point must be less than setpoint when in cooling mode. (N₂ purge connection available)

167 x 280 x 280 mm (6.5 x 11.0 x 11.0 in)

Bench/table

7.1 kg (15.6 lb)

Yes

115 VAC 50 and 60 Hz, 300 W maximum (optional 100 or 230 VAC)