Zum Inhalt springen

Impac IGAR 6 Series Pyrometers

Active

Highly accurate digital ratio pyrometer with possible combination of 1-color and 2-color measurement, focusable optics and integrated display. Temperature ranges between 100 and 2550 °C.

The Impac® IGAR 6 Smart pyrometer can operate in one-color mode (100 to 2550 °C), two-color mode (250 to 2550 °C), or special smart mode.

In two-color mode (ratio method), two adjacent wavelengths are used for temperature determination. Temperature measurement is largely independent of the object’s emissivity and, in wide ranges, unaffected by dust and other contaminants. The measuring object can be smaller than the spot size. You also can measure through dirty-viewing windows up to a certain contamination point.

In Smart mode, the measurements at lower temperatures will be taken in 1-color mode and the measurements at higher temperatures will be taken in 2-color mode (ratio method).

Via InfraWin, the user can set the temperature at which the instrument automatically transitions from 1-color mode to 2-color mode. The minimum transition temperature is 250 °C and the minimum transition temperature range is 30 °C.

Eigenschaften

  • Complete digital core for sub-ranging and adopted analog output
  • High quality optics with manual focus capability
  • Robust, stainless steel sensor for harsh environments (IP65/NEMA4)
  • Four-digit LED display
  • Dirty-window warning

Vorteile

  • Measure fast processes thanks to a 2 ms response time
  • Connect to a PC via an RS485 to USB connection
  • Adjust parameters and analyze data using InfraWin software
  • Automatically determine emissivity when using the two-color or smart mode

Spezifikationen

Betriebstemperaturbereich (°C): 100 to 2550 °C
Spektralbereich (µm): 1.5 and 2.5 (2 ranges in between)
Messunsicherheit (°C): From 0.4% oR + 2 °C
Optik (mm): Focusable optics
FOV (minimale Punktgröße) (mmm): Min 100:1 (2.1)
Ausrichten / Sichten: Built-in laser aiming light, through-lens sighting, or color TV camera
Schnittstelle / Ausgang (mA): 0/4 to 20 mA
Belichtungszeit t90 (ms): 2 ms
Alle Spezifikationen Spezifikationen zusammenklappen

Lagerbestand prüfen

Modellnummer
Ausgangstyp Optik Ausrichtung Reaktionszeit Min. Temperatur (°C) Max. Temperatur (°C) Anwendungen Proben Kaufen
3 914 700 Active, Kontakt 0/4 to 20 mA / RS232 / RS485 Manually Focusable Laser Target 2 100 2000 Metal / Ceramics / Graphite Kontakt Kaufen
3 914 710 Active, Kontakt 0/4 to 20 mA / RS232 / RS485 Manually Focusable Viewfinder 2 100 2000 Metal / Ceramics / Graphite Kontakt Kaufen
3 914 720 Active, Kontakt 0/4 to 20 mA / PAL / RS485 Manually Focusable Color TV Camera 2 100 2000 Metal / Ceramics / Graphite Kontakt Kaufen

Zubehör

Impac Power Supplies

Impac Pyrometer DC and AC Power Supply Units

Impac PI 6000 Controller

Extremely Fast, Digital, and Programmable PID Controller

Impac Other Electrical

Other Electrical Accessories Compatible With Impac Pyrometers

Impac MultiTempLogger

Multi-Channel Measuring Data Logging Software Supplementary downloads only; contact sales for software

Impac Mechanical Accessories

Other Mechanical Accessories Compatible With Impac Pyrometers

Impac DA 6000-N

LED digital display with RS232 or RS485 interface for digital pyrometers

Impac DA 6000

Digital LED Display With 2-Wire Supply Voltage

Impac DA 4000

Digital LED Display With 2-Wire Supply Voltage

Vergleichen Sie

Model Impac IGAR 6 Series Impac IGAR 320 Series Impac ISR 320 Series Impac ISR 6 Series
Spektralbereich (µm) 1.5 and 2.5 (2 ranges in between) 1.5 and 2.5 (2 ranges in between) 0.9 and 1.05 (2 ranges in between) 0.9 and 1.05 (2 ranges in between)
Messunsicherheit (°C) From 0.4% oR + 2 °C 0.6% oR + 2 °C From 0.5% oR + 1 °C From 0.3% oR + 2 °C
Optik (mm) Focusable optics Fixed optics Fixed optics Focusable optics
FOV (minimale Punktgröße) (mmm) Min 100:1 (2.1) Min 100:1 (3) Min 100:1 (3) Min 350:1 (0.6)
Ausrichten / Sichten Built-in laser aiming light, through-lens sighting, or color TV camera Built-in LED targeting light and LEDs for intensity alignment Built-in LED targeting light and LEDs for intensity alignment Built-in laser aiming light, through-lens sighting, or color TV camera
Belichtungszeit t90 (ms) 2 ms 10 ms 10 ms 2 ms
Anzeige LED, 4 digit matrix, 5 mm high for 2-color or 1-color temperature signal or measuring distance LED, 4 digit matrix, 5 mm high for 2-color or 1-color temperature signal or measuring distance
Emissionsgrad Neigung 0.600 to 2.000 in 0.1% steps (2-color mode) 0.600 to 2.000 in 0.1% steps (2-color mode) 0.800 to 1.250 in 0.1% steps (2-color mode) 0.800 to 1.200 in 0.1% steps (2-color mode)

Dienstleistungen

Repair

Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.

Agreement Term Options

Calibration and Alignment

Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications.  Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards​.

Agreement Term Options

Total Service Package

We offer customized service bundles that include calibration, alignment, and extended warranty. Services will include scheduled calibration with adjustment and repairs as needed. Any software/firmware upgrades are also made available for customers.

Agreement Term Options

Service Agreements

Reduce annual maintenance costs and simplify forecasting by building a custom service agreement into your annual operating plan. We have the capability, expertise, and capacity to provide repair services, upgrades, refurbishments, exchange, and other service offerings to support maintenance and use of AE Products. We offer multi-year contracts and provide faster turnaround time for covered products.

Agreement Term Options

Field services and On-Site Training

Our field service engineers are available to support your on-site needs. We can properly secure and mount products, hook up your electrical connections, validate alignment and calibrate, and test to your specifications.

24/5 Support verfügbar

Holen Sie sich Expertenrat von unseren Ingenieuren

Wir sind bestrebt, unseren Kunden einen hervorragenden Kundendienst und technischen Support zu bieten. Mit Live-Chat und Telefon-Support können Sie jederzeit einen qualifizierten Techniker um Hilfe bitten.
Jetzt Unterstützung anfordern
Code added on 30 Aug 24

Looking for the right solution? Let's chat!

Chat Now Just Browsing