Zum Inhalt springen

Revolutionizing Solid Organ Tumor Ablation with High Voltage Solutions

Veröffentlicht August 09, 2023 von Todd Huston

Pulsed field ablation (PFA) is a non-thermal energy modality that is being used to reduce and remove solid organ tumors. This technique applies a high voltage electrical field to cells to increase the permeability of the cell membrane, which leads to targeted cell death. While PFA has proven to be effective, researchers have recently developed a new type of irreversible electroporation (IRE) technique called high-frequency IRE (H-FIRE), which offers unique benefits.

There are two types of electroporation: reversible and irreversible. Reversible electroporation creates non-permanent pore formation where a low-intensity electric field is applied, permitting chemicals, drugs or DNA to enter the cell. Irreversible electroporation is the creation of permanent pores, leading to cellular homeostasis disruption and cell death. IRE has primary applications in cardiac and tumor ablation.

From an electrical engineering perspective, the difference between the two techniques is a function of the electrical field strength and the duration for which the field is applied. Established PFA approaches typically apply 80 to 120 unipolar pulses with a pulse duration of 50 to 100 ms and an electric field that exceeds 1,000 V/cm. While this can be effective, this protocol may cause muscle contraction, leading to pain for the patient and displacement of electrode needles.


In contrast, H-FIRE uses a set of bipolar pulse bursts consisting of individual pulses with durations from 0.5 to 10 ms, grouped into a burst of up to 100 ms. H-FIRE offers unique benefits, including selective targeting of cardiomyocytes while sparing collateral damage to the connective tissue structure.

Multiple studies have documented the application of IRE to liver tumors, with the earliest dating back to 2011. The applied voltage was in the range of 1.5-3 kV/cm with a duration between 70-100 µs, and the best results were obtained using plate electrodes to deliver 80 pulses of 100 ms at 0.3 Hz with an electrical field magnitude of 2.5 kV/cm across the tumor.

PFA Power

The primary challenge of power solution design for PFA systems is the need to deliver high energy HV (High Voltage) pulses reliably and repeatably. For life science applications, typically a low power system in the 2-300 W region is required. For surgical applications, individual pulses has an average power for the system in the kilowatt region.

The voltage required is typically in the 1 kV to 3 kV range with some applications requiring up to 5 kV with currents up to 65 A. Pulse widths are typically in the range 100 ns to 100 µs with burst mode frequencies up to 5 MHz. The associated slew rates for the pulse are both significant and challenging.

To meet these challenges, a power solution for a PFA application consists of multiple stages, converting from the AC mains input to the high-voltage pulsed DC output required for treatment. The first stage is the AC input and power factor correction (PFC), which addresses critical compliance parameters including primary-secondary isolation, leakage current, EMI filtering and PFC.


The second stage is the DC-DC converter. This stage will convert the input voltage of typically 380 VDC to the high voltage pulse output required for the application. The topology for this stage depends on the waveform requirements of the application. For example, a flyback converter may be suitable for unipolar pulse applications, while a forward converter may be better suited for bipolar pulse applications.

One technology suitable for this stage is Advanced Energy’s UltraVolt® C series of high-power regulated DC-DC converters, which are optimized for laser, capacitor-charging and pulsed power applications. This series features 17 devices with voltages from 125 to 60,000 V and a typical ripple of less than 10,000 ppm. Available in single-output positive or negative polarities, the converters deliver up to 250 W of fast-rise charging power with less than 1% overshoot from a 24 VDC input. In addition, several analog interfaces enable control and monitoring of the high-voltage output and current.

The third stage is the output filter. This stage will attenuate any residual switching noise or ripple on the high voltage output before it is delivered to the load. The filter topology will be dependent on the application requirements, with options including low-pass filters, Pi filters and T filters.

In addition to the power supply, other components of the PFA system include the pulse generator, electrode needles and control software. The pulse generator creates the high voltage pulses that are delivered to the tissue through the electrode needles, while the control software allows the operator to configure the waveform parameters and monitor the treatment progress.


Pulsed field ablation is a promising technique for solid organ tumor ablation and cardiac ablation, with the potential to deliver precise, non-thermal energy to target tissues while minimizing collateral damage to surrounding tissue. The power supply is a critical component of the PFA system, requiring the reliable and repeatable delivery of high voltage pulses with the required waveform parameters. The right power supply design ensures that PFA systems provide safe, effective treatment for a range of medical applications.

With the broadest AC/DC, DC/DC, and high voltage standard and modified products and platforms, coupled with extensive applications and compliance experience, Advanced Energy offers systems designers an unrivalled range of proven power solutions for PFA power supply design.


Teilen Sie

Todd Huston

Advanced Energy
As Advanced Energy’s Director of Strategic Marketing for Electrosurgery, Todd Huston develops strategic marketing plans for the company’s broad medical power portfolio of standard and configurable products to power the future of medicine. He is a senior technology and marketing professional with deep knowledge of the global healthcare industry as well as a passionate strategist with a proven track record leading teams in commercializing disruptive technologies at two Fortune 500 Companies. Todd previously served as an electrosurgery product manager for the Tumor Ablation portfolio at a leading medical device company.
Mehr Beiträge von Todd Huston

Verwandte Beiträge


SEMICON West 2023: AE Advances the Angstrom Era with Transformational New Technologies

August 23, 2023

By Skip Larson

Last month, the semiconductor industry converged on the “City by the Bay” to discuss a wide range of solutions for design, manufacture and test. Under the banner of “Building a Path Forward,” more than 570 exhibitors showcased solutions at San Francisco’s Moscone Center. This year’s discussions focused on the opportunity and challenges the industry will face as semiconductor sales approach the $1 trillion level by 2030, up from $600 million today. Key issues that will either support or hinder the industry include closing technology gaps and critical talent shortages, along with limiting supply chain disruptions and the impact on climate change. What was clear is that delivering high-performance chips with increasingly complex 3D structures at atomic-scale dimensions is demanding more sophisticated wafer process solutions based on real world-processing data to accelerate modeling for faster design turns than ever before.
Advanced Energy AE News Industry News


Digital Power for Medical Applications

August 16, 2023

By Tommy O'Brien

An aging population and a recognition that early detection of ailments enhances life expectancy and reduces costs mean that the number of healthcare applications is growing rapidly. While powering medical technology can be challenging, new digital configurable power solutions offer a number of benefits by enabling control and communication with medical PSUs ‘on the fly’.
Industry News


SVC TechCon 2023 – Quality, Throughput, Yield

Juni 22, 2023

By Mike Meyer

The annual conference of the Society of Vacuum Coaters – better known as SVC TechCon – has been an important annual fixture for the vacuum coating industry since its inception 66 years ago.
Industry News
Kategorien A-Z
Tragen Sie sich in unsere Mailingliste ein
Neueste Beiträge
View on X