콘텐츠로 건너뛰기

Innova Series

Active

Improve Process Efficiency and Reduce Waste using Gas Monitoring Solutions

Advanced Energy’s Innova series photoacoustic spectroscopy (PAS) based trace and multi-gas monitoring systems deliver high detection sensitivity to a wide range of application environments. The series offers highly accurate and stable direct measurement independent of external variables without requiring carrier gases or consumables. The Innova series sequentially and individually detects and monitors up to five substances and humidity. The series comprises gas monitoring systems as well as samplers and dosers that address such applications as refrigerant emissions and leak measurements, waste anesthesia monitoring, automotive exhaust gas or SHED evaporative testing, soil science and contamination, ventilation performance, biogas analysis, industrial hygiene-IAQ monitoring, and SF6, R134a, and CO2 detection and monitoring.

특징

  • Selectively measure a wide range of gases / vapors
  • Reduce/eliminate calibration requirements
  • Collect air samples from multiple locations
  • Remotely control using the gas monitor or a PC
  • Minimize expensive tracer gas consumption
  • Achieve exceptional accuracy
  • Promptly operate (rapid warm-up time)

혜택

  • Pneumatic system constructed of AISI-316 Stainless Steel and PTFE tubing to minimize gas adsorption
  • Enabling all tracer gas methods
  • Linear response over a wide dynamic range
  • Independent from pressure or density readings
  • Available in single or multiple gas configuration
  • Multi-gas monitoring

사양

작동 온도 범위(°C): 5 to 40
보호 등급: IP 20, IP 40
무게(kg): 11 to 14
CE 라벨: CE-mark indicates compliance with: EMC Directive and Low Voltage Directive
전력 소비(W): 35
소프트웨어: 7650 Basic Ventilation Software, 7651 Advanced Ventilation Software, BZ7007, LumaSoft 7880, Windows® 7, 8, 8.1, and Windows® 10

기술 문서

제목 유형
Air Purification Device Testing Application Note (924 KB) 애플리케이션 노트
Emission Monitoring in Animal Husbandry Application Note (551 KB) 애플리케이션 노트
Fumigant Monitoring Application Note (409 KB) 애플리케이션 노트
Greenhouse Gas Flux Monitoring in Soil Science Application Note (845 KB) 애플리케이션 노트
Industrial Hygiene Application Note (221 KB) 애플리케이션 노트
Landfill Emissions Application Note (220 KB) 애플리케이션 노트
Leak Testing of Insulated Switchgears Application Note (851 KB) 애플리케이션 노트
Measurement of Anesthetic Agents in Operating Rooms Application Note (493 KB) 애플리케이션 노트
Measurement of Chlorinated Compounds in Soil-Gas Application Note (669 KB) 애플리케이션 노트
Mobile AC Refrigerant Emissions Monitoring Application Note (433 KB) 애플리케이션 노트
Photocatalytic Material Testing Application Note (141 KB) 애플리케이션 노트
Refrigerant Leak Detection Application Note (251 KB) 애플리케이션 노트
SF6 Leak Detection in Enclosed GIS Substations (687 KB) 애플리케이션 노트
SHED Evaporative Emissions Testing Application Note (537 KB) 애플리케이션 노트
Ventilation Performance Application Note (410 KB) 애플리케이션 노트
气体感测解决方案 (17 MB) 브로셔
Gas Sensing Overview Brochure (13 MB) 브로셔
Innova 1314i 产品资料 (725 KB) 데이터 시트
Innova 1314i Data Sheet (2 MB) 데이터 시트
Innova 1403 产品资料 (693 KB) 데이터 시트
Innova 1403 Data Sheet (658 KB) 데이터 시트
Innova 1409 产品资料 (788 KB) 데이터 시트
Innova 1409 Data Sheet (877 KB) 데이터 시트
Innova 1512 产品资料 (846 KB) 데이터 시트
Innova 1512 Data Sheet (2 MB) 데이터 시트
Innova 3433i Data Sheet (2 MB) 데이터 시트
Innova 3731 Data Sheet (2 MB) 데이터 시트
Innova 7651 Advanced Data Sheet (688 KB) 데이터 시트
Innova Gas Detection Limit Tables (9 MB) 데이터 시트
LumaSoft Gas Multipoint Software 7880 Data Sheet (1 MB) 데이터 시트
BZ7007 Remote and Offline Software Manual (2 MB) 매뉴얼
Innova 1314i Manual (9 MB) 매뉴얼
Innova 1403 Multipoint Sampler and Doser Manual (1 MB) 매뉴얼
Innova 1409 Multipoint Sampler BE6037 14 manual (889 KB) 매뉴얼
Innova 1512 Manual (8 MB) 매뉴얼
Innova BZ7002 Calibration Software Manual (1 MB) 매뉴얼
Innova BZ7003 Offline Software Manual (1010 KB) 매뉴얼
Innova BZ7007 Software Manual (2 MB) 매뉴얼
Innova Stand Alone Multipoint System Manual (801 KB) 매뉴얼
Innova UA1373 and UA1374 Analog/Relay Interface Module Manual (595 KB) 매뉴얼
Innova Ventilation Software 7651 Manual (4 MB) 매뉴얼
LumaSoft Software 7820 and 7880 Manual (8 MB) 매뉴얼
PAS Basic Ventilation Software 7650 Manual (2 MB) 매뉴얼
Innova 7650 Basic Software (263 MB .zip) (289 MB) 소프트웨어
Innova BZ7002 Calibration Software (139 MB .zip) (140 MB) 소프트웨어
Innova BZ7003 Offline Software (216 MB .zip) (217 MB) 소프트웨어
Innova BZ7007 Software (217 MB .zip) (217 MB) 소프트웨어

액세서리

Innova LumaSoft Single Point 7820

Application Software for Single Channel Monitoring

Innova LumaSoft Multi Point 7880

Application Software to perform Gas Monitoring tasks in up to 24 locations

Innova BZ7003 Offline Software

Free version to set up the Gas Monitor without connecting it to a PC and to download gas monitor's data

Innova BZ7002 Calibration Software

Free version to calibrate the gas monitor connecting it to a PC and back-up of the calibration data

Innova 7650 Basic

Application Software for Ventilation and Air-Exchange Measurements

Innova BZ7007 Remote & Offline Software

BZ7007 Software is used during set-up and to retrieve data from a stand alone system where the gas monitor is used as the system controller

서비스

Calibration and Alignment

Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications.  Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards​.

Agreement Term Options

Repair

Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.

Agreement Term Options

Service Agreements

Reduce annual maintenance costs and simplify forecasting by building a custom service agreement into your annual operating plan. We have the capability, expertise, and capacity to provide repair services, upgrades, refurbishments, exchange, and other service offerings to support maintenance and use of AE Products. We offer multi-year contracts and provide faster turnaround time for covered products.

Agreement Term Options

Total Service Package

We offer customized service bundles that include calibration, alignment, and extended warranty. Services will include scheduled calibration with adjustment and repairs as needed. Any software/firmware upgrades are also made available for customers.

Agreement Term Options

24시간 (24/5) 고객 지원

전문 엔지니어의 기술지원을 받아보세요.

저희는 고객에게 우수한 고객 서비스와 기술 지원을 제공하기 위해 최선을 다하고 있습니다. 실시간 채팅 및 전화 지원을 통해 언제든지 자격을 갖춘 엔지니어에게 도움을 요청할 수 있습니다.
지금 지원 받기