.svg){kind=logo}
Latest Blog Posts
Blog
When a Single Temperature Reading Isn't Enough
11월 05, 2026
This blog explores why a single temperature reading may not provide enough insight into molten metal processes. It examines measurement challenges in demanding environments and how combining pyrometry with thermal imaging can provide a more complete view of changing thermal conditions, helping manufacturers better understand process consistency, equipment performance and product quality.
Editor's Picks
Blog
Medical Imaging Trends Impact on Advanced Power Technologies – Part 1: Ultrasound and X-Ray
5월 18, 2026
With people living longer overall, diagnoses of cancer, cardiovascular disease, and other aging-related diseases are increasing. Advancements in medical imaging technologies further enable more widespread screenings, prevention and treatment of various medical conditions.
Blog
EMI Management for Board-Mounted Power Modules
5월 08, 2026
Board-mounted power modules offer a convenient and compact solution to system power-supply challenges. However, any switched-mode power converter can be a source of electromagnetic interference (EMI), which needs to be correctly managed.
All Blog Posts
Blog
New Safety Standards and Medical Power Implication of Transition to IEC 60601-1 Edition 3.2
1월 22, 2024
When certifying a medical product, updates to an industry standard can make for challenging times for medical equipment manufacturers, especially when a standard is costly to publish, impacting the cost of compliance as well.
.jpg?resizemode=force&maxsidesize=884)
Blog
Dynamic Reverse Pulsing – What About the Anode?
12월 04, 2023
A previous AE blog, Dynamic Reverse Pulsing – What About Duty Cycle?, discussed reactive sputter deposition of insulating thin films in large-area coaters, describing the benefits of using the Dynamic Reverse Pulse (DRP) power-delivery mode over the bipolar (BP) mode of dual magnetron sputtering. In DRP mode , dual targets are bipolar pulsed against an explicit anode and the duty cycle can be varied so that the polarity is positive on the target for a shorter time during pulsing. This allows clearing of charge build-up on the targets. In our studies, DRP mode showed increased deposition rate and reduced substrate temperature when compared to similar depositions with the BP mode.
Blog
Top 5 Takeaways from OCP 2023
11월 16, 2023
Last month marked our 6th year of engagement and partnership with the OCP community through the OCP Global Summit, which took place on Oct. 17 – 19 in San Jose, Calif. Our journey started with the ORv2 12V power shelf, and we’re now transitioning towards the next-generation 48V ORv3 power shelf.
