跳至内容
tegam ®

2510A Low Power RF Standard - Thermistor

Active

Microwave Calibration Standard, Feedthrough, 10 MHz to 50 GHz

Advanced Energy's 2510A Temperature Stabilized Coaxial RF Power Transfer (Feedthrough) Thermistor Standard enables the precise measurement of microwave power in the 10 MHz to 50 GHz frequency range. The 2510A is highly accurate and stable with time and temperature and is designed to calibrate RF thermistor, thermocouple,and diode terminating power sensors.  The Model 2510A features a 2.4mm female connector.  
These RF Power Standards work with TEGAM’s 1830A RF Power Meter, as well as our legacy DC Self-Balancing Bridges, 1806 and 1806B.  System configurations employing instruments of this accuracy typically achieve calibration factor transfer results normally found only in primary standards laboratories.

特点

  • Calibrate RF Power Sensors from 10 MHz to 50 GHz
  • 0.01 to 10 mW usable range (-20 to +10 dBm)
  • Transfer Standard configuration
  • PMX & SYSIIB Compatible
  • Rack mount option available
  • 3 year warranty
  • Assembled in USA

益处

  • Frequency range covers the calibration range of common sensors
  • Designed specifically for power sensor calibration
  • Calibrate sensors in multiple power ranges, utilizing optional attenuators
  • Industry leading warranty

规格

Calibration Factor Accuracy (typical): +/-(1.0 to 4.0)% from 10 MHz to 50 GHz
Connector Type: 2.4mm female
Frequency Range: 10 MHz to 50 GHz
Power Range: 0.01 to 10 mW (-20 to +10 dBm)
Reflection Magnitude (typical): 0.01 to 0.25 from 10 MHz to 50 GHz
Required Power Meter: Thermistor
RF Impedance (nominal): 50 Ohms
Sensor Type: Thermistor
所有规格 折叠规格

库存检查

型号
Calibration Factor Accuracy (typical) Connector Type Frequency Range Power Range Required Power Meter 购买
2510A Active, 联系我们
Microwave Calibration Standard, Feedthrough, 10 MHz-50 GHz
+/-(1.0 to 4.0)% from 10 MHz to 50 GHz 2.4mm female 10 MHz to 50 GHz 0.01 to 10 mW (-20 to +10 dBm) Thermistor 购买

Accessories Stock Check

Adapter, 2.4 mm coax (M) to 2.92 mm (F) with Data
Adapter, 2.4 mm coax (M) to 3.5 mm (F) with Data
Adapter, 2.4 mm coax (M) to 2.92 mm (F) with Data
Torque Wrench, 8 mm, 8 in-lbs, for 3.5 mm, 2.92 mm and 2.4 mm
Attenuator, 30 dB, 2.4 mm Coax (M) to (F) with Data
Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 15"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

Cable, Voltage Bias and Heater, 1830A to 15XX/25XX, 48"

Heater cable (4-pin mini to 4-pin mini)
For use with the following combinations:
• 1806A connected to F1130A/B and F1135A/B
• 1830A connected to F1130A/B and F1135A/B

Cable, 1806A to 15XXA/25XXA
Cable, 1806 to 15XXA/25XXA
Torque Wrench, 8 mm, 8 in-lbs, for 3.5 mm, 2.92 mm and 2.4 mm
Transport Case for 15XXA RF Power Standard

Transport case for 1505A and 1510A power standard
Note: 1510-910 is a standard item with a new purchase 
of the 1505A or 1510A

Transport Case for 1830A, F113X & 25XXA

Transport case for 1830A, F113X, 2505A, 2510A, M1130
and M1135

Power Sensor Calibration Accessories

PM Series Accessories

技术文档

服务

Calibration and Alignment

Advanced Energy has the tools and processes to ensure your equipment continues to meet its original specifications.  Our products are calibrated at global AE service sites with proprietary technology designed to exceed industry standards​.

Agreement Term Options

Repair

Our worldwide service centers provide fast cycle times, use only AE-qualified parts, and follow the original product's specifications and test procedures for the highest quality repair or calibration.

Agreement Term Options

提供 24/5 支持

获取我们工程师的专家建议

我们致力于为客户提供优质的客户服务和技术支持。通过即时聊天和电话支持,您可以随时向合格的工程师寻求帮助。
立即获取支持