已发布 三月 29, 2012
CARLSBAD, Calif. [March 29, 2012] – Emerson Network Power, a business of Emerson (NYSE: EMR) and the global leader in enabling Business-Critical Continuity™, today announced a high efficiency 100-150 watt ac-dc power supply that can be used for Power-over-Ethernet (PoE) applications. The new LPS109-M power supply is ideal for powering PoE-enabled networking devices such as Ethernet switches or applying a DC voltage to CAT5 cable for powering remote devices such as IP security cameras, WLAN access points, VoIP phones and other PoE-compatible products.
The main output of the Emerson Network Power LPS109-M meets the electrical isolation requirements of the IEEE 802.3at-2009 PoE standard. The power supply also carries both information technology equipment (ITE) and non-patient contact and non-patient critical medical safety approvals, making it suitable for a diverse range of low power applications.
Packaged as a very compact open-frame unit, the LPS109-M has a footprint of just 2 x 4 inches (50.8 x 101.6 mm) and a height of only 1.29 inches (33 mm). It has a typical full load efficiency of 88 percent and a power density in excess of 14 watts per cubic inch (0.88 watts per cubic centimeter). These attributes mean that the power supply can easily be accommodated in narrow (1U high) rack-mount and low-profile equipment. There is also an optional metal safety enclosure kit (LPX50) available.
The LPS109-M has a universal 90-264 Vac input, enabling it to be used almost anywhere in the world without adjustment, and is also capable of operating from a 120-300 Vdc input. The power supply produces a main output of 54 Vdc, rated at 1.85 A continuous with normal connection cooling, which can be up rated to 2.8A with forced air cooling. It also produces an isolated 12 Vdc fan output, rated at 1 A. The main output is regulated to within plus/minus two percent, and can be adjusted over the range 48.6 to 59.4 Vdc. Remote sense is provided to compensate for a drop of up to 0.5 V between the main output connector and the load; the power supply will operate without remote sense connected.
Active power factor correction is employed to minimize input harmonic current distortion and ensure compliance with the international EN61000-3-2 standard. The power supply has a maximum safety-ground leakage current of 275 μA, and the main output has a hold-up time of 10 millisecond minimum when delivering its full 150 watts of output power.
Emerson Network Power LPS109-M power supplies are comprehensively protected against overvoltage, over temperature and short-circuit conditions, and feature a ‘power fail’ signal for remote monitoring purposes which will change state at least 6 milliseconds before the main output loses regulation. The power supplies have a full-load ambient operating temperature range of 0 to +50 degrees Celsius without derating, can operate up to 70 degrees Celsius with derating, and can cold-start from as low as -20 degrees Celsius.
LPS109-M ac-dc power supplies comply with the rigorous EN55022-B and FCC part 15 Level B EMC standards for conducted noise and meet all applicable immunity standards, including EN61000-4-2, -3, -4, -5, -6, -8 and -11. The power supplies carry a wide set of safety approvals, including TUV/UL/cULus/CB/CQC 60950/60601-1 and CE Mark (LVD).
Emerson Network Power’s LPS109-M power supplies have a mean time between failure (MTBF) of 534,000 hours (calculated in accordance with Bellcore standards), running at full load and 25 degrees Celsius ambient, and are backed by a comprehensive two year warranty. The supplies are available for immediate delivery, and standard lead time is stock to eight weeks.
About Emerson Network Power
Emerson Network Power, a business of Emerson (NYSE:EMR), is the global leader in enabling Business-Critical Continuity™ from grid to chip for telecommunication networks, data centers, health care and industrial facilities. Emerson Network Power provides innovative solutions and expertise in areas including AC and DC power and precision cooling systems, embedded computing and power, integrated racks and enclosures, power switching and controls, infrastructure management, and connectivity. All solutions are supported globally by local Emerson Network Power service technicians.
Emerson (NYSE: EMR), based in St. Louis, Missouri (USA), is a global leader in bringing technology and engineering together to provide innovative solutions for customers in industrial, commercial, and consumer markets around the world. The company is comprised of five business segments: Process Management, Industrial Automation, Network Power, Climate Technologies, and Commercial & Residential Solutions. Sales in fiscal 2011 were $24.2 billion.
关于先进能源Advanced Energy Industries, Inc.（纳斯达克股票代码：AEIS）是为关键任务应用和流程设计和制造高度工程化、精密电源转换、测量和控制解决方案的全球领先企业。Advanced Energy 的电源解决方案使客户能够在半导体设备、工业生产、医疗和生命科学、数据中心计算、网络和电信等众多行业的复杂应用中实现创新。凭借工程专有技术以及为全球客户提供的快速响应服务和支持，公司建立了合作伙伴关系，以满足技术进步的需求，推动客户的增长，并创新未来的电源。先进能源公司四十年来一直致力于完善电力系统。公司总部位于美国科罗拉多州丹佛市。
Advanced Energy | Precision.动力。性能。信任