Temperature Measurement Products

Impac IS 5 and IGA 5

Stationary, Digital Pyrometers for Metal Surface Temperature Measurement, 250 to 3000°C

Advanced Energy’s fast and infrared Impac IS 5 and IGA 5 pyrometers are ideal for non-contact temperature measurement of metals, ceramics, or graphite.

  • Compact
  • Digital interface
  • Analog output adjustable
  • Small spot sizes
  • Storage for maximum values
  • Overview
  • Technical Specs
  • Documents
  • Accessories
  • Service & Support

Overview

The digital, infrared Impac® IS 5 and IGA 5 pyrometers are ideal for fast heating processes and measuring short temperature peaks. The pyrometers feature a 2 ms response time and you can choose from a laser-targeting light or viewfinder for precise alignment. Set parameters (emissivity, exposure time, and analog output) directly on the devices or via your PC using InfraWin software. You can also log data and analyze the complete temperature measurement process from your PC. 

Benefits

  • Measure short temperature peaks and fast heating processes
  • Precisely target measuring objects
  • Achieve high accuracy
  • Log and analyze data
  • Detect small measuring objects
  • Store maximum values

Features

  • Very small spot sizes, minimum 0.5 mm
  • Laser-targeting light or through lens viewfinder are available
  • Analog output adjustable 0 to 20 mA or 4 to 20 mA
  • Built-in maximum value storage
  • Digital interface
  • Bus capable with RS485 interface
  • Small dimensions

Select specifications are shown below. Please see product data sheet for additional specifications.

  • Temperature Ranges

    IS 5

    650 to 1800°C (MB 18)
    600 to 2000°C (MB 20)
    800 to 2500°C (MB 25)
    1000 to 3000°C (MB 30)

    IGA 5

    350 to 1800°C (MB 18)
    250 to 2000°C (MB 20)
    400 to 2500°C (MB 25)
    500 to 3000°C (MB 30)

    Any range adjustable within the temperature range, minimum span 51°C

  • Measurement

    Spectral Ranges

    IS 5: 0.8 to 1.1 μm
    IGA 5: 1.45 to 1.8 μm

    Measurement Uncertainty

    < 350°C: 0.5% of reading in °C + 1°C
    350 to 1500°C: 0.3% of reading in °C + 1°C
    < 350°C: 0.5% of reading in °C + 1°C
    ε = 1, t90 = 1 s,  Tamb. = 25°C

    Repeatability

    0.2% of reading in °C + 1°C
    ε = 1, t90 = 1 s, Tamb. = 25°C

    Exposure Time t90

    ≤ 2 ms, adjustable to 0.01 s, 0.05 s, 0.25 s, 1 s, 3 s, 10 s

    Emissivity ε

    0.2 to 1.0 adjustable in the instrument or with the software InfraWin in steps of 0.01

  • Optical

    Sighting

    Laser targeting (maximum power level < 1 mW, λ = 630 to 680 nm, CDRH class II) or through lens viewfinder

    Optics

    Two fixed optics that are adjusted ex works to one of the distances mentioned in the data sheet

  • Interface and Communication

    Parameters

    Analog Output

    0 to 20 mA or 4 to 20 mA, switchable, linear in temperature, load independent DC

    Digital Interface

    Optional RS232 or RS485 (addressable), half duplex, baud rate 1.2 up to 38.4 kBd

  • Environmental

    Protection Class

    IP 65 (DIN 40050)

    Ambient Temperature

    0 to 70°C (32 to 158°F)

    Storage Temperature

    -20 to 70°C (-4 to 158°F)

    Relative Humidity

    Non-condensing conditions

    Weight

    0.550 kg (1.21 lb)

    Housing

    Stainless steel

    CE Label

    According to EU directives about electromagnetical immunity

  • Electrical

    Power Supply

    24 VDC ±25%, stabilized, ripple must be less than 50 mV

    Power Consumption

    ≤ 3 W (including active laser-target light)

    Isolation

    Power supply, digital output, and analog output are galvanically isolated against each other

  • Typical Applications

    • Induction heating
    • Casting
    • Annealing
    • Welding
    • Forging
    • Sintering
    • Melting
    • Rolling
    • Hardening

Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.

Accessories

Temperature Linescan Systems

Rotation/Scanning Attachments and Built-in Scanner

Power Supplies

Fast, Digital, and Programmable PID Controller

PI 6000 Controller

Extremely Fast, Digital, and Programmable PID Controller

MultiTempLogger

Multi-Channel Measuring Data Logging Software

Global Support & Services

Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.

Learn More

Applications Support & Consulting

Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.

Learn More

Warranties

Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.

Learn More

Product Support

Call
Inside the U.S.: 1.800.446.9167 (option 2)
Outside the U.S.


Email
Thin Film Support
Thermal Product Support
Other Technical Support

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.

Thank You

You may now view any resource on the Advanced Energy site. Click the button below to view your requested resource.