- Products
- High Voltage Products
- High Voltage Amplifiers
- Piezo Drivers
- Trek PZD700A Piezo Driver and Amplifier
High Voltage Products
Trek PZD700A Piezo Driver and Amplifier
DC-Stable, High Voltage Piezo Driver and Amplifier, Output Voltage 0 to ±700 VDC or Peak AC
Advanced Energy’s Trek PZD700A high voltage piezo driver and amplifier offers customer-specified output voltages in bipolar or unipolar ranges. And it can be used in various applications such as piezoelectric driving and control, laser modulation, and semiconductor research.
- Output Voltage: 0 to ±700 VDC or peak AC
- Output Current: 0 to ±100 mA
- Slew Rate: Greater than 380 V/µs
- Large Signal Bandwidth: DC to greater than 125 kHz (-3 dB)
- Gain: 0 to 300 V/V, adjustable
*Specifications shown are for bipolar unit, for unipolar operation please refer to tech specs
- Overview
- Technical Specs
- Documents
- Accessories
- Service & Support
- Distributors
Overview
The DC-stable Trek® PZD700A is a high voltage piezo driver and amplifier that offers precise control of customer specified output voltages in bipolar or unipolar ranges. It achieves the accurate output responses and high slew rates demanded by reactive loads by utilizing a four-quadrant active output stage that sinks or sources current into reactive or resistive loads.
The Trek PZD700A is configured as a non-inverting amplifier. An inverting configuration is available. Both configurations are available as either single or dual-channel instruments. The Trek PZD700A is benchtop operable or mountable via a 19-in rack.
Benefits
- Adjust gain, 0 to 300 V/V
- Rely on ultra-accurate outputs thanks to low-output noise
- Save costs thanks to maintenance-free operation and an all-solid-state design
- Achieve high accuracy via a closed-loop system
- Safeguard equipment with short-circuit protection
Features
- Digitally enabled
- Automatic power limit
- Dynamic adjustment optimizes the AC response for various load parameters
- NIST-traceable calibration certificate provided with each unit
- Four-quadrant output for driving capacitive loads
Select specifications are shown below. Please see product data sheet for additional specifications.
-
Performance
Output Voltage Range
0 to ±700 VDC or peak AC
Output Current Range
0 to ±100 mA
Gain
0 to 300 V/V, adjustable using the front panel potentiometer
Slew Rate
Greater than 380 V/μs (10% to 90%, typical)
Large Signal Bandwidth
DC to greater than 125 kHz (-3 dB)
-
Voltage Monitor
Ratio
1/200th of the high voltage output
DC Accuracy
Better than ±0.1% of full scale
-
Current Monitor
Ratio
0.1 V/mA, ±1% of full scale
DC Accuracy
Better than ±1% of full scale
Output Impedance
-
Mechanical
Dimensions
110 x 220 x 445 mm (4.3 x 8.7 x 17.5 in)
Weight
5 kg (11 lb)
-
Electrical
Line Voltage
Factory Set for one of two ranges: 90 to 127 VAC or 180 to 250 VAC, either at 48 to 63 Hz
Power Consumption
90 VA, single channel
175 VA, dual channelAC Line Receptacle
Standard 3-prong with integral fuse holder
-
Operating Conditions
Temperature
0 to 40°C (32 to 104°F)
Relative Humidity
To 85%, noncondensing
Altitude
To 2000 meters (6561.68 ft)
-
Typical Applications
- Piezoelectric driving/control
- Laser modulation
- MEMS
- Semiconductor research
- Piezoelectric vibration damping
Specifications are subject to change without notice. Not all options and accessories are available for all models and configurations. Dimensions listed generally refer to standard configurations and module bodies only. Please confirm technical specifications and customizations with a sales representative. Advanced Energy is not responsible for errors or omissions.
Accessories
Documents & Support
View All Trek PZD700A Piezo Driver and Amplifier AccessoriesGlobal Support & Services
Maximize fab productivity and capital equipment ROI with world-class support through each product lifecycle stage — from startup to long-term operation. Our service offerings are based on more than three decades of precision power and applications expertise.
Applications Support & Consulting
Accelerate tool installations and process development programs, or address specific applications concerns with Advanced Energy's dedicated applications consultants and engineering staff. Benefit from on-site reviews, analyses, and consultations.
Warranties
Decrease variability in maintenance costs and provide additional cost protection. Advanced Energy offers whole-box extended warranties.
Product Support
Call
U.S.: +1 800 446 9167
Asia: +86 29 8874 1895
China: 400 8899 130
EMEA: +44 800 032 1546
U.K.: 08000 321 546
Email
Thin Film Support
Thermal Product Support
Other Technical Support
Find an AE Representative or Distributor
To find distributors and representatives who sell AE products in your area, select your location and vendor type (optional).